ON THIS PAGE
Tafric request data as of November 18, 2026
The wholesale price of plastic chairs in Nigeria depends mainly on how much plastic each chair contains and what kind: the weight per chair, virgin or recycled polypropylene, fillers and UV protection, then on freight, duty and the number of chairs that fit in a stack and a container. When you buy from Turkey, compare suppliers on the same weight and material per piece, not on the catalogue photo, and add the landed costs before deciding.
Tafric is a B2B marketplace that connects Turkish manufacturers with African buyers: the buyer posts a request for free, Tafric checks it, and Turkish manufacturers in that category contact the buyer directly.
What decides the wholesale price of plastic chairs in Nigeria, Ghana and Kenya?
The wholesale price of a plastic chair is set first by the weight and grade of the polymer in it, because raw material is a large share of the cost of an injection-moulded product, and then by freight, duty and the local margin. Two chairs that look alike in a photo can differ a lot in weight and material, which is why market prices vary so widely.
| Price factor | Why it matters | What to ask the supplier |
|---|---|---|
| Weight per piece | more polymer means a stronger chair and a higher price | the weight of one chair in grams |
| Virgin or recycled material | recycled or mixed polypropylene costs less but can be more brittle and vary in colour | the material and the share of recycled content |
| Fillers | mineral fillers such as calcium carbonate lower the cost and can reduce strength | whether fillers are used |
| UV stabiliser | chairs used outdoors fade and turn brittle in strong sun without it | whether a UV additive is included |
| Design and mould | armchairs, rattan-look backs and folding tables use more material or more complex moulds | the model, and whether the mould is the factory's own |
| Pieces per stack and per container | bulky items carry freight cost per piece | pieces per stack and per 40 ft high-cube |
| Packing | stacks wrapped in film take less space than individual cartons | how chairs and tables are packed |
Polypropylene and polyethylene prices follow the petrochemical market, so ask how long the supplier's price is valid. In Nigeria, Ghana and Kenya the law requires import cargo to be insured with a local insurer, so ask Turkish suppliers for FOB or CFR prices rather than CIF, then add freight, insurance, duty, port charges and inland transport. Our guide to import duty in Nigeria and landed cost shows how to estimate the total.
Where are plastic household products made in Turkey?
Plastic household products in Turkey are made mostly in and around Istanbul, the country's largest plastics cluster, with further plastics production in Izmir, Ankara, Bursa, Kocaeli, Konya and Gaziantep. Turkey is the second-largest plastics producer in Europe, according to the Turkish plastics industry association PAGEV.
In 2025, Turkey exported about $678 million of plastic tableware, kitchenware and other household articles (HS 3924), according to UN Comtrade data reported by Turkey. Its largest markets were Jordan, Germany, the United Kingdom, the UAE and the United States; Morocco, at about $30 million, ranked eighth and was the largest African buyer, followed by Libya at about $11 million, while shipments to Nigeria, Ghana and Kenya were each below $1 million. For buyers south of the Sahara this means two things: Turkish ranges are often made to European specifications, and plastics travel well in a mixed container with other Turkish goods such as furniture, kitchenware or cleaning products.
Post a request with your item list so it reaches the plastic product manufacturers in this category. Many requests in this category are for packaging; if you need bottles, jerrycans or preforms, see our guide to plastic bottles from Turkey.
What should a plastic chair and table specification include?
A plastic chair specification should name the model (armless, with arms, bistro or folding), the weight per chair, the material, the colour, UV protection for outdoor use, the maximum load it is designed for and the number of chairs per stack. Write the same items for every supplier so that you compare like with like.
Monobloc chairs, moulded in one piece of polypropylene, are the standard for events, restaurants, churches and schools because they stack and are easy to clean. For events and rental businesses, durability matters more than the first price: a heavier chair in virgin material lasts longer under daily stacking and outdoor sun. Ask whether the chair has been tested to a recognised standard for outdoor seating, such as the European EN 581 series, and ask for a sample to load and stack yourself. Plastic tables are specified by size, top thickness, leg type (fixed or folding) and the number of seats they serve; ask whether the table and chairs come in matching colours.
Buckets, basins and storage boxes: what should you specify?
Buckets, basins and storage boxes are specified by capacity in litres, wall thickness or weight per piece, material, colour and accessories such as lids, handles, clips or wheels. Capacity alone is not enough: a thin 20-litre bucket and a thick one can differ greatly in weight and life.
| Product | Specify | Watch out for |
|---|---|---|
| Buckets | litres, with or without lid, metal or plastic handle, weight per piece | food-grade material if used for water or food |
| Basins and bowls | diameter or litres, wall thickness, round or oval | thin basins crack when carried full |
| Storage boxes | litres, transparent or coloured, clip lid, wheels, whether empty boxes nest | lids that do not lock when stacked full |
| Kitchenware and food containers | type, size, lid seal, microwave or dishwasher use | a declaration of compliance for food contact |
| Bins and dustbins | litres, pedal or swing lid, wheels | thickness at the base and wheels |
For anything that touches food, ask the Turkish manufacturer for its declaration of compliance and migration test report. Turkey regulates plastic food-contact materials under the Turkish Food Codex communiqué No. 2019/44, which follows the European approach of approved substances and migration limits. Polypropylene is not made with bisphenol A, but ask for the food-contact documents rather than relying on a sticker.
How do bulky plastics ship from Turkey, and how many fit in a container?
Plastic household goods are light and bulky, so a container fills by volume long before it reaches its weight limit, and the number of pieces per container decides the freight cost per piece. A 40 ft high-cube container is the usual choice for chairs, tables and storage boxes.
The count depends on the design: chairs that stack tightly, buckets and basins that nest and boxes that nest when empty carry far less freight per piece than boxed items. Ask each supplier for the number of pieces per stack and per 40 ft high-cube, and compare the freight per piece, not only the price per piece. Many buyers fill one container with several products, for example chairs, tables, buckets and basins, which spreads the freight over a wider range; if you buy less than a container, see our guide to FCL or LCL from Turkey. Stacks should be wrapped in film and, for chairs, protected at the legs so that the bottom chairs are not crushed during the voyage.
What are the import rules for plastic household goods in Nigeria, Ghana and Kenya?
Plastic household goods need the right tariff heading and, in many African markets, a conformity certificate before shipment; check both with a licensed clearing agent before you pay a deposit. Plastic kitchenware, buckets, basins and storage boxes are usually classified under HS 3924, monobloc plastic chairs under 9401.80 and plastic tables under 9403.70, and each heading has its own duty rate.
| Country | What to check |
|---|---|
| Nigeria | The revised prohibition list in force since 1 April 2026 bans 17 groups of goods from outside ECOWAS and does not name plastic household articles, but its official HS annex has not been published; confirm your code, then plan SONCAP and open a Form M before shipment |
| Ghana | The Ghana Standards Authority's EasyPASS certificate of conformity is required before loading for goods in scope, which include plastics (HS chapter 39) and furniture (chapter 94), so both household plastics and plastic chairs and tables need it; local cargo insurance is required for commercial imports |
| Kenya | KEBS PVoC: all goods not on the exempted list, including plastic household articles, need a certificate of conformity before shipment; import cargo must be insured with a Kenyan insurer |
| Other countries | Tanzania, Uganda and Zimbabwe run their own pre-shipment conformity programmes; confirm the scope for your product |
Ask your clearing agent for the duty and taxes on your exact code before ordering, and see our guide to pre-shipment inspection in Africa for how certificates of conformity work.
How do you order plastic household products from Turkey, step by step?
A first wholesale order of plastic chairs or household plastics from Turkey works best when the specification, the sample and the loading plan are agreed before the deposit is paid.
1) Write one specification per item: model, size or litres, weight per piece, material, colour, UV protection and packing. 2) Ask two or three Turkish manufacturers for the price on the same specification, with pieces per stack and per container. 3) Order samples, weigh them, stack them and, for chairs, sit and load them. 4) Agree in writing on the price, Incoterm, colours per container, delivery time, tolerance on weight and the loading plan. 5) Start your country's conformity certificate with the supplier before production ends. 6) Check the goods or photos of the loaded stacks before the balance payment. Pay only into a bank account in the supplier company's name.
On Tafric you post your request for plastic chairs, tables, buckets or storage boxes for free, and Turkish manufacturers in the category contact you directly. Write the products, the quantity per item, the weight or material you need and your delivery city. Post your request.
Frequently asked questions
How much is a plastic chair wholesale in Nigeria?
It varies with the weight and material of the chair, UV protection, freight, duty and the importer's margin, so there is no single price. To compare, ask suppliers for the weight per chair, the material and the number of chairs per 40 ft high-cube, and calculate the landed cost per chair.
Can I import plastic chairs from Turkey to Nigeria?
Plastic household articles are not named among the 17 groups on Nigeria's prohibition list in force since 1 April 2026, but the official HS annex is unpublished. Have a licensed customs agent confirm your HS code, then plan SONCAP and open a Form M before shipment.
What material are good plastic chairs made of?
Most are injection-moulded polypropylene. Chairs in virgin polypropylene with a UV stabiliser and a higher weight per chair last longer outdoors and under daily stacking than light chairs made from recycled or heavily filled material.
Where are plastic household products made in Turkey?
Mostly in and around Istanbul, Turkey's largest plastics cluster, with further plastics production in Izmir, Ankara, Bursa, Kocaeli, Konya and Gaziantep.
What is the HS code for plastic buckets and basins?
Plastic household articles such as buckets, basins, kitchenware and storage boxes are usually classified under HS 3924. Monobloc plastic chairs are usually under 9401.80 and plastic tables under 9403.70; confirm the code with your clearing agent.
Are plastic food containers from Turkey safe for food?
Ask the manufacturer for a declaration of compliance and migration test report. Turkey regulates plastic food-contact materials under the Turkish Food Codex communiqué No. 2019/44, which follows the European approach of approved substances and migration limits.

The Tafric Editorial Team writes export, import and shipping guides for trade between Türkiye, Africa and the Middle East. Articles use data from real buying requests published on Tafric (with no personal information, stating the period covered) and official sources such as customs authorities, trade ministries, UN Comtrade and the World Bank. Articles get a second review of figures and regulations before publication and are updated when rules change. Details: our Editorial policy page.


